Computer tables are a great way to organize and display your computer and other office supplies. They come in each figure and size and can be made from multiple materials. If you’re looking for a new computer table or want to learn how to make your own, check out this step-by-step guide.
Making a trendy computer table is not as hard as it seems, but there are some basic steps you need to follow to get the perfect look. This guide will show you how to make your very own trendy computer table with just a few easy steps.
What Do You Need to Consider for Making the Best Computer Table?
If you plan to make your computer table, you will need certain items before beginning. The best part about these items is that many of them can be used for other things in your house once they have served their purpose with the computer table!
Here’s a list of essentials for making the best computer tables:
Power Strip: You will need this to supply power to each side of the desk. It’s also good to have additional outlets available just in case you need them!
Small Cutter: This can be used throughout the process if you need it. Keep one around, so it’s there when needed!
Stud Finder: To attach the desk to the wall, you will need to know where the studs are located. This will make sure that your table is sturdy and won’t wobble!
Level: This is optional, but it can be very helpful in making sure that your computer table is straight.
Plywood: You will need a sheet of plywood at least 24″ x 48″.
Circular Saw: You will need this to cut the plywood. You can also jigsaw for this purpose. Make sure to read the instruction on the corded jigsaw guide before using it.
Tape Measure: To measure and mark where you will be cutting.
Drill: With a drill bit that is the same size as your screws.
1 1/2″ Screws – You will necessity around 20 of these.
Hammer: If you are using nails instead of screws.
Nail Gun: If you are using nails instead of screws.
Paint or Stain: To finish your table.
Lacquer: Optional, but helps to protect the paint or stain.
Step 1: Choose the Right Materials
The first step is to choose the right materials for your table. You will need a sturdy piece of wood or metal for the base, and then you can choose whatever material you want for the top. We recommend using light wood or metal such as bamboo or aluminum for a trendy look.
Step 2: Cut the Pieces
Next, you will need to cut the pieces for your table. The base should be cut to be just a bit taller than the desired table height. If you want your chair to roll under your table, you can add about four inches of space between where the top will sit and the floor. The top is easily cut to fit whatever size you desire.
Step 3: Sand the Pieces
The next step is sanding all of the pieces until they are smooth. This can be done with a hand-held sander or with a belt sander if big areas need to be sanded out quickly. Then, wipe off any sawdust with a damp cloth. Let them dry completely before continuing to the next step. Once all is dry, you can move on to the forward step.
Step 4: Stain or Paint the Pieces
If you are going to stain the pieces, then do it now. Once the stain is dry, you can paint them if you want. Use a primer first if the wood is not already white. Then, use any color of paint that you like. Let them dry perfectly before moving on to the forward step.
Step 5: Assemble the Table
To assemble the table, start by attaching the legs to one of the sides using screws. Make sure that everything is level before attaching the other side. Next, attach the top using screws or nails. If you are using a sawtooth hanger, drill pilot holes first so the wood does not split.
Step 6: Cover the Cables
To cover your cables, cut a hole in the side of one of the pieces. Make sure to leave an extra 1/2-inch so you can fit all your cables through it. Then, attach a grommet around the hole using a rubber mallet and a grommet tool. The type of rubber should come with the grommet kit that you bought from Walmart or any home improvement store near you.
Once the rubber is tight, fit your cables through each hole and attach another grommet on top, making sure to match up where all four holes connect. Using cable clips like these keeps everything neat while allowing easy access to anything inside when needed.
Step 7: Use Some Fillers to Hide the Gaps
If you’re like me, you might want to hide those unsightly gaps between your computer table and the wall. In my case, I used a piece of cardboard that was cut to the same width as the tabletop. I also used some spray adhesive to make it stick better. You could also use wood filler or anything else that matches the color of your table. After it’s dry, sand it down until it’s nice and smooth.
Step 8: Stain or Paint Your Table
This is completely optional, but if you’d like to give your new computer table a fresh look, stain or paint it! I recommend using a sealant after either process to keep it looking good for years to come.
You can use different colors to paint these tables or even leave them natural. The choice is up to you!
Step 9: Apply Some Furniture Polish
Once your table is finished, apply some furniture polish to give it a nice shine. This will also help protect the finish from scratches and stains. Gently, apply the polish in a circular motion and let it dry.
Step 10: Connect with Electric Supply
Once your table is finished, connect with an electric supply. Install the power strip on each side of the table, one on each end of the shelf. Connect the cord to the power supply and plug it in for use! You can use information blogs and diagrams for this purpose. It is very easy to buy the tools and stuff to make these tables. You can buy online head to the Fridayrack site. It will help to make your table easily.
Enjoy Your Creation!
After your computer table is finished, you can enjoy it! Try adding some beautiful decorations to make it more personalized. Add pictures, flowers, candles, anything that suits your style. You can even give them away as gifts or sell them for a profit. The possibilities are endless!
And there you have it! A simple guide on how to make your very own computer table. I hope you enjoyed the guide and that now you know how to make one for yourself (or as a gift!). Please feel free to share and suggest changes if needed. Thank you!
